FHSF077-A12 Dark Grey Aluminum Outdoor Sofa Set, 4-Piece Patio Set with Rope-Back Seats and Slat Table for Terrace and Garden
FHSF077-A12 Dark Grey Aluminum Outdoor Sofa Set, 4-Piece Patio Set with Rope-Back Seats and Slat Table for Terrace and Garden
Model
FHSF077-A12
Item specifics
Frame
Powder-coated aluminum, dark grey
Frame colour
Dark grey
Seat back
5 mm polyester round rope weave panel
Cushion
360 g short-fibre outdoor fabric, 12 cm thick, 24D sponge core
Table top
Light wood slat
Armrest
Wood-tone armrest cap
Set composition
2 single-seaters, 1 three-seater, 1 coffee table
Single-seater size
W86 x D82.5 x H72 cm
Three-seater size
W222 x D82.5 x H72 cm
Coffee table size
W120 x D60 x H35 cm
Net / gross weight
63 / 67 kg per set
Packing
1.01 cbm / 2 cartons per set
Container load
63 sets per 40HQ
Fabric
Outdoor fabric made to order
Review
Description
Dark grey aluminum outdoor sofa set with a rope-weave back
FHSF077-A12 is a four-piece outdoor seating group: two single-seaters, one three-seater and one slat-top coffee table, all carried on the same dark grey powder-coated aluminum frame. The single-seaters and the three-seater share one detail that separates them from a plain box frame - the back is closed with a panel of 5 mm polyester round rope instead of a solid plate or a bare gap.
The four-piece set on a terrace: two single-seaters, the three-seater and the slat-top coffee table, with wood-tone armrest caps throughout.
Seat cushions are 12 cm thick in 360 g short-fibre outdoor fabric over a 24D sponge core. They sit as loose cushions on the frame, so a stained cover can be swapped or a tired pad replaced without ordering the whole set. The coffee table is 120 x 60 cm at 35 cm high, low enough to sit under the sightline of the three-seater.
This model belongs to the same range of aluminum outdoor sofa sets the factory already builds, which is why individual pieces and spare cushions can be reordered later against the same frame colour.
The four pieces
One configuration, four pieces. Component sizes are listed below and can be adapted to a layout on request.
Three-seaterW222 x D82.5 x H72 cm
Single-seaters x2W86 x D82.5 x H72 cm each
Coffee tableW120 x D60 x H35 cm
Seat cushions12 cm thick, 360 g short-fibre fabric
Dimensions
All three elevations are drawn to the same 1:16 scale, so the three-seater can be compared against the single-seater and the coffee table before a layout is signed off.
W 86 cm
H 72
Single-seater x2W86 x D82.5 x H72 cm
W 222 cm
H 72
Three-seaterW222 x D82.5 x H72 cm
W 120 cm
H 35
Coffee tableW120 x D60 x H35 cm
The rope-weave back
The back panel is woven from 5 mm polyester round rope, threaded between the top rail and the seat rail. It is the one component a client notices first when walking past the set, and it is also the reason the frame stays rigid without a diagonal brace.
Rear view of a single-seater: 5 mm polyester round rope threaded across the back panel, with the wood-tone armrest cap over the frame.
Why rope rather than a solid back
A woven back lets air move behind the cushion, so the cover dries after rain instead of trapping moisture against a plate. It also keeps the outline of the set open, which matters on a terrace where a solid back would read as a wall.
What it changes in service
The rope panel is a serviceable part - it can be re-strung without replacing the frame
Rain passes through the weave, so no water collects behind the seat cushion
The back stays cool against the arm on a hot day
No cushion contact with a hard plate, so the cushion cover wears less at the seam
Frame and finish
The powder-coated aluminum frame on a patio: squared legs, wood-tone armrest caps and the slat-top coffee table between the two seating pieces.
What is on the outside
Powder-coated aluminum frame in dark grey, all four pieces from the same batch
Wood-tone armrest caps, matched across the single-seaters and the three-seater
Light wood slat coffee table top, replaceable if it is damaged in service
Loose 12 cm seat cushions, no fixed seams to the frame
Adjustable feet to take up uneven paving on a patio or courtyard
What can be changed
Frame colour beyond the dark grey production finish, made to order against a reference
Outdoor fabric grade and cushion filling
Component sizes, when a layout calls for a longer three-seater or a taller table
Specifications
Model
FHSF077-A12
Set composition
2 single-seaters, 1 three-seater, 1 coffee table
Single-seater
W86 x D82.5 x H72 cm
Three-seater
W222 x D82.5 x H72 cm
Coffee table
W120 x D60 x H35 cm
Frame
Powder-coated aluminum, dark grey
Seat back
5 mm polyester round rope weave panel
Armrest
Wood-tone armrest cap
Seat cushion
360 g short-fibre outdoor fabric, 12 cm thick, 24D sponge core
Table top
Light wood slat
Net / gross weight
63 / 67 kg per set
Packing
1.01 cbm, 2 cartons per set
Container load
63 sets per 40HQ
Where it is specified
Hotel patiosOne dark grey frame language repeated across every seating group on the terrace.
Garden terracesThe rope back keeps the outline open where a solid back would close the view.
Poolside courtyardsWoven backs drain, so cushions dry instead of holding water behind them.
Restaurant gardensLoose 12 cm pads that can be turned or replaced between seasons.
The three-seater and coffee table on a terrace deck, with the single-seaters closed at both ends of the group.
Packing and container load
Cartons per set
2 cartons, 1.01 cbm total per set
Net / gross weight
63 kg net and 67 kg gross per set
Container load
63 sets per 40HQ
Mixed loads
Individual pieces, spare cushions and spare slat tops can be added to a container order
Sample orders
Single sets can be quoted for evaluation before a container is committed
Frequently asked questions
What is included in the set?
Two single-seaters, one three-seater and one coffee table, so four pieces in total. Individual pieces can be ordered separately when a client is extending an existing group.
What is the rope back made of?
A panel of 5 mm polyester round rope, threaded between the top rail and the seat rail of each seating piece, and serviceable on its own without replacing the frame.
How thick are the cushions?
12 cm, in 360 g short-fibre outdoor fabric over a 24D sponge core. They are loose, so they can be turned, aired or replaced independently.
What is the packing and container load?
Two cartons per set at 1.01 cbm in total, 63 kg net and 67 kg gross. A 40HQ takes 63 sets.
Can the set be built in another colour or fabric?
Yes. Dark grey is the production finish, and any further frame colour, fabric grade or cushion filling is made to order against a reference supplied by the client.
Request a quotation for FHSF077-A12
Send the set configuration, the frame colour and the fabric reference. We confirm the drawing, the packing list and the delivery window.
