Box-frame aluminum outdoor sofa set with teak armrests
FHSF207-D1 is a five-piece outdoor lounge set built on a box-section aluminum frame. Each piece carries the same squared side frame, so the arms, legs and rails read as one continuous outline rather than a collection of joints. Armrests are capped in solid teak, and the coffee table takes a light wood slat top that lifts the whole set against a dark frame.
The five-piece set at a pool deck: three-seater, two single-seaters, coffee table and bench.
Cushions are 10 cm thick on a 25D sponge core, covered in 220 g Olefin, which is chosen for outdoor use because it resists fading and does not hold water. On the three-seater and the single-seaters the back cushions are loose and channel stitched, so they can be turned and replaced independently of the seat pads.
The set is produced in two frame colourways, and both are on this page: the dark frame in the two scene photographs, and the light frame in the studio views of the individual pieces. Any further colour is made to order against a reference.
Dimensions
All four drawings are to the same scale, so the pieces can be compared directly. The set ships with two single-seaters.
W 85 cm
H 76
Single-seater x2W85 x D79 x H76 cm
W 199 cm
H 76
Three-seaterW199 x D85 x H76 cm
W 150 cm
H 65
Coffee tableW150 x D89.5 x H65 cm
W 140 cm
H 38
BenchW140 x D40 x H38 cm
Typical arrangement
Plan view of the five-piece arrangement: the three-seater facing the two single-seaters across the coffee table, with the bench closing the group. Drawn to the same scale as the elevations above.
Three-seater 199 x 85Single 85 x 79Single 85 x 79Table 150 x 89.5Bench 140 x 40
Construction and materials
The box-section frame under the bench and table. Load runs through the squared side frame rather than a diagonal, which keeps the outline clean and makes the underside easy to clean under.
Cushion build
Cover220 g Olefin
Seat pad10 cm thickness
Core25D sponge
Frame and finish
Box-section aluminum frame with squared side panels
Solid teak armrest caps, matched across the set
Light wood slat coffee table top
Loose channel-stitched back cushions on the seats
Two frame colourways in production, dark and light, both photographed on this page
Further colours and fabrics made to order against a reference
10 cm seat pad, 220 g Olefin cover, 25D sponge core
Table top
Light wood slat
Net / gross weight
63 / 68 kg per set
Packing
2 cartons per set, 0.842 cbm in total
Container load
76 sets per 40HQ
Where it is specified
Roof terracesSquared frames that hold their outline against a skyline.
Pool decksOlefin covers that dry quickly and resist fading.
Hotel courtyardsOne frame language across every seating group.
Restaurant terracesLoose cushions that can be turned and replaced.
The same set on a roof terrace.
Ordering
Set configuration
Five pieces as listed, or split into individual pieces for a larger layout
Colour
Two colourways in production, dark and light; further colours made to order against a reference
Fabric and filling
Outdoor fabric and cushion filling made to order
Sizes
Component sizes adjusted to a layout on request
Packing
2 cartons per set, 0.842 cbm in total, 63 kg net and 68 kg gross; 76 sets per 40HQ
Quotation
Confirmed against the drawing, the colour reference and the delivery window
Frequently asked questions
What is included in the set?
Two single-seaters, one three-seater, one coffee table and one bench. Individual pieces can be ordered separately when a client is extending a layout.
What are the cushions made of?
A 10 cm seat pad on a 25D sponge core, covered in 220 g Olefin, with loose channel-stitched back cushions on the seats.
How is the frame built?
A box-section aluminum frame with squared side panels. The load runs through the side frame rather than a diagonal brace, so the outline stays clean and the underside is easy to clean under.
What is the packing and container load?
Two cartons per set, 0.842 cbm in total, 63 kg net and 68 kg gross. A 40HQ takes 76 sets.
Can the set be extended later?
Yes. Every piece shares the same box-section frame and teak armrest cap, so single-seaters or a bench can be added later and match the original set.
Request a quotation for FHSF207-D1
Send the set configuration, the colour and the fabric reference. We confirm the drawing, the packing list and the delivery window.
