Khaki aluminum outdoor sofa set with teak armrests
FHSF207 is a five-piece outdoor lounge set built on a box-section aluminum frame finished in khaki, made up of two single-seaters, one three-seater, one slat-top coffee table and one footstool bench. Every piece carries the same squared side frame, so the arms, legs and rails read as one continuous outline instead of a collection of joints.
The five-piece set on a coastal terrace: three-seater, two single-seaters, coffee table and footstool bench.
Armrests are capped in solid teak and left unfinished, so the timber weathers to a pale silver-grey against the khaki frame. The set belongs to the wider range of aluminum outdoor sofa sets built by the same factory, which is why loose cushions and single pieces can be reordered later and still match.
Cushions are covered in a 360 g short-fibre outdoor fabric over a 24D sponge core: a 13 cm seat pad and a 12 cm back cushion on the seater pieces, both cut as separate loose cushions so they can be turned, aired and replaced without touching the frame.
The five pieces
The set ships as five pieces in one configuration. Component sizes are listed below and can be adjusted to a layout on request.
Three-seaterW199 x D85 x H75 cm
Single-seaters x2W79 x D85 x H75 cm each
Coffee tableW150 x D89 x H65 cm
Footstool benchW140 x D40 x H40 cm
Dimensions
All four elevations are drawn to the same 1:16 scale, so the pieces can be compared directly against each other before a layout is fixed.
W 79 cm
H 75
Single-seater x2W79 x D85 x H75 cm
W 199 cm
H 75
Three-seaterW199 x D85 x H75 cm
W 150 cm
H 65
Coffee tableW150 x D89 x H65 cm
W 140 cm
H 40
Footstool benchW140 x D40 x H40 cm
Cushion specification
Four layers decide how the set feels and how long it lasts outdoors. The short-fibre cover is the outdoor-facing layer; the sponge core sets the seat height.
Cover360 g short-fibre outdoor fabric
Seat pad13 cm thickness
Back cushion12 cm thickness
Core24D sponge
Why the thickness matters
A 13 cm seat pad sits higher than a standard 10 cm pad, which keeps knees above hip level on a low-slung frame and makes the three-seater comfortable to get out of. The 12 cm back cushion is cut as its own loose block rather than sewn to the seat, so the two can be rotated independently when one side sits in the sun.
Loose channel-quilted back cushions on the three-seater, held by the squared side frame rather than fixed to the seat.
Frame and finish
The squared side frame and solid teak armrest cap. Load runs through the frame rather than a diagonal brace, which keeps the outline clean and leaves the deck under the seating clear.
What is on the outside
Box-section aluminum frame with squared side panels, powder coated in khaki
Solid teak armrest caps, matched across all five pieces
Light wood slat coffee table top, replaceable if it is damaged in service
Loose seat and back cushions, channel quilted, no fixed seams to the frame
Adjustable feet to take up deck unevenness on roof and terrace floors
What can be changed
Frame colour beyond the khaki finish, made to order against a reference
Outdoor fabric grade and cushion filling
Component sizes, when a layout needs a longer three-seater or a deeper table
Box-section aluminum, squared side panels, khaki powder coat
Armrest
Solid teak cap
Cushions
360 g short-fibre outdoor fabric, 13 cm seat pad, 12 cm back cushion, 24D sponge core
Table top
Light wood slat
Net / gross weight
74 / 84 kg per set
Packing
194 x 70 x 66 cm and 153 x 12 x 93 cm per set
Container load
64 sets per 40HQ
Where it is specified
Hotel terracesOne khaki frame language across every seating group on the floor.
Pool decksShort-fibre covers that drain and dry instead of holding water.
Restaurant patiosLoose 13 cm pads that can be turned or replaced between seasons.
Coastal villasUnfinished teak that weathers to silver beside a saltwater view.
The slat-top coffee table and the footstool bench, both carried on the same squared side frame as the seating.
Packing and container load
Cartons per set
2 cartons: 194 x 70 x 66 cm and 153 x 12 x 93 cm
Net / gross weight
74 kg net and 84 kg gross per set
Container load
64 sets per 40HQ
Mixed loads
Individual pieces, spare cushions and spare slat tops can be added to a container order
Sample orders
Single sets can be quoted for evaluation before a container is committed
Frequently asked questions
What is included in the set?
Two single-seaters, one three-seater, one coffee table and one footstool bench, so five pieces in total. Individual pieces can be ordered separately when a client is extending an existing layout.
What are the cushions made of?
A 13 cm seat pad and a 12 cm back cushion in 360 g short-fibre outdoor fabric, both over a 24D sponge core, and both loose so they can be turned or replaced on their own.
How is the frame built?
A box-section aluminum frame with squared side panels, powder coated in khaki. The load runs through the side frame rather than a diagonal brace, which keeps the outline clean and leaves the deck under the seating clear for cleaning.
What is the packing and container load?
Two cartons per set, 194 x 70 x 66 cm and 153 x 12 x 93 cm, 74 kg net and 84 kg gross. A 40HQ takes 64 sets.
Can the set be built in another colour or fabric?
Yes. The khaki frame is the production finish, and any further frame colour, fabric grade or cushion filling is made to order against a reference supplied by the client.
Request a quotation for FHSF207
Send the set configuration, the frame colour and the fabric reference. We confirm the drawing, the packing list and the delivery window.
