160KG Heavy-Duty Split Steel Cantilever Umbrella Base
- Model
- Cantilever Base Series
Item specifics
- Type
- Modular Cantilever Umbrella Base
- Max Load
- 160 KG (A3)
- Plate Size
- 45 × 45 cm per plate
- Main Material
- Steel Plate
- Connector Material
- HD Polypropylene
- Surface Finish
- Electroplated + Powder-Coated
- Configurations
- A1 55KG / A2 80KG / A3 160KG
- Steel Thickness A1
- 18 mm
- Steel Thickness A2
- 12 mm
- Steel Thickness A3
- 24 mm
- Plates A1 / A2
- 4-piece
- Plates A3
- 8-piece
- Color
- Grey / Wood-Grain Brown
- Specification Level
- Level B · Standard — Standard specification with upgraded frame and fabric.
Review
Description
Built for Stability. Designed for Flexibility. The A3 spec combines 8 steel plates to 160KG, giving large cantilever umbrellas the ballast they need against coastal winds. Each 45×45cm plate weighs a manageable 18-24kg, so two installers can carry the kit through hotel corridors and rooftops. Pick 55KG, 80KG or 160KG to match your umbrella size, project budget and wind exposure. Electroplating plus powder-coating seals the steel against poolside chlorine, salt air and humidity. Engineered specifically as the ballast partner for side-pole cantilever umbrellas — pairs with our cantilever base series. Specified for hotels, resorts, beach clubs and restaurant terraces across coastal and tropical climates. Traditional 160KG cantilever bases are a single block — almost impossible to deliver to upper floors or remote terraces. This base breaks the ballast into 4 or 8 modular plates so each component is a one-person lift. This base is built around three materials chosen for long service life under sun, salt and pool water: Keep large cantilever umbrellas stable through afternoon wind and poolside traffic. The dual-coated steel and HDPE connectors resist salt air and humid coastal air. Modular plates fit through narrow kitchen doors and restaurant back-entries. Choose 80KG or 160KG depending on umbrella size and exposure to prevailing wind. Need help matching the base to your cantilever? Talk to our engineering team for a recommended configuration. Need a matching umbrella? Browse the center-pole umbrella range, the cantilever range or the LED umbrella range. Use A1 (55KG) for 2–3M residential umbrellas, A2 (80KG) for 3M light commercial umbrellas in sheltered locations, and A3 (160KG) for 3–4M commercial or coastal umbrellas where wind exposure is high. This base is the steel base only. It is designed to pair with our cantilever umbrella range, but it is also compatible with most side-pole cantilever umbrellas on the market that share the standard 45×45cm footprint. The base ships as individual plates (18–24kg each). Two installers can carry all plates to most rooftops, terraces and pool decks. Assembly is mechanical — plates bolt together via the HDPE connectors — no welding required on site. The electroplated + powder-coated finish is maintenance-free for normal outdoor use. Rinse with fresh water periodically if installed by the sea to remove salt deposits, and check the leveling feet every 6 months. A filled base anchors the umbrella against wind and keeps the pole vertical on patios, decks and pool surrounds. Powder-coated or galvanised steel and resin shells resist corrosion in salt air and poolside humidity. Fill caps and drain points let a base be topped up or emptied between seasons without tools. Weight, footprint and fixing method are confirmed against the canopy size and the local surface. Request a base sample and the full size and weight schedule for this model, or browse our complete product catalogs. Send your quantity and destination port for a quotation within one working day. The questions buyers ask most often about this model. Tap a question to read the answer. This model is specified as Brand Foris Hortus; Type Modular Cantilever Umbrella Base. All dimensions and finishes can be adjusted for the project, and the full size range is available on request. Resin, concrete, steel-plated and water-filled bases are produced, and the size is matched to the pole diameter and the canopy it carries. Bases are supplied as a separate item so the weight can be matched to the surface and to local wind exposure. Fixing method, anchoring and drainage are confirmed with the project specification. Bases are shipped as a separate consignment from the umbrella frame and canopy. Outdoor furniture carries a 12-month warranty from the date of loading, with third-party inspection supported before shipment. Every Foris Hortus product sits in one of four configuration tiers. The tier is set by frame section, fabric specification and hardware, and it stays the same whether the order is one piece or a full scheme. Volume orders and straightforward commercial layouts. Standard aluminium frame, standard canopy fabric, fixed position. The usual specification for hotel and restaurant terraces. Upgraded frame section and fabric weight, added adjustment or opening system. Flagship hospitality projects where the terrace is photographed. Marine-grade hardware, higher-specification fabric, LED or rotation as standard. Multi-scheme developments specified to a full site brief. Bespoke dimensions, matched base and furniture, project documentation and QC. Prices are not published. Send your quantity, size and destination port and we will reply with a quotation within one business day.
160KG Heavy-Duty Split Steel Cantilever Umbrella Base
Why Choose This Cantilever Base
Six engineering advantages for commercial-grade cantilever installations
160KG Max Load
Split Modular Design
3 Weight Options
Dual-Coated Steel
Built for Cantilevers
Commercial-Ready

Split Modular Construction
Heavy-duty ballast that still fits through a service door
Three Configurations, One Base System
Match ballast to umbrella size, exposure and budget
Spec A1 · 55KG A2 · 80KG A3 · 160KG Total Weight 55 KG 80 KG 160 KG Number of Plates 4-piece 4-piece 8-piece Plate Size 45 × 45 cm 45 × 45 cm 45 × 45 cm Steel Thickness 18 mm 12 mm 24 mm Best Paired With 2-3M residential 3M light commercial 3-4M commercial / coastal Typical Use Villa terrace Café patio Hotel poolside, rooftop Engineered for Outdoor Longevity
Steel + dual coating + HDPE connectors

Where This Base Shines
Trusted across commercial outdoor environments
Hotel Pool Decks
Beach Resorts
Restaurant Terraces
Café & Beach Clubs
Frequently Asked Questions
Common questions from hotel, resort and project buyers
Which base configuration should I choose for my cantilever umbrella?
Is this base sold with or without the cantilever umbrella?
How is the base shipped and installed?
What maintenance does the steel base require?
At a glance
Features
Weighted stability
Marine-grade finish
Drainage and service access
Matched to the frame
Options & customisation
Need Samples or Detailed Specifications?
Frequently Asked Questions
What are the main specifications?
What sizes and weights are available?
How is it installed?
What is the packaging and warranty?
Four Specification Tiers, One Build Standard







