360KG Heavy-Duty Welded Marble Base for Large Cantilever Umbrellas
- Model
- Cantilever Base Series
Item specifics
- Product Type
- Heavy-Duty Marble Umbrella Base
- Suitable For
- Commercial Large Cantilever Umbrella
- Total Weight
- ~360 kg
- Base Dimensions
- 145 × 120 × 20 cm
- Marble Slab Size
- 46 × 46 × 5 cm
- Marble Quantity
- 10 Pieces
- Marble Weight Per Piece
- ~28 kg
- Total Marble Weight
- ~280 kg
- Frame
- Welded Steel Frame
- Materials
- Marble Slab + Welded Steel
- Color Options
- Black / White
- Installation
- Modular marble assembly + central pole fixing
- Recommended For
- Hotels, Resorts, Poolside Lounges, Beach Clubs, Restaurants, Luxury Villas
- Specification Level
- Level C · Premium — Premium specification for flagship hospitality projects.
Review
Description
A commercial-grade counterweight engineered for large cantilever umbrellas. Combines a welded steel frame with 10 marble slabs to deliver 360 kg of stable support for luxury hotels, resorts, poolside lounges, and beach clubs. Built to resist canopy leverage and wind loads while adding a premium visual finish to high-end outdoor spaces. Ten marble slabs plus a welded steel frame create a heavy-duty foundation that keeps large cantilever umbrellas upright. Each 46×46×5 cm slab weighs ~28 kg for easier transport and on-site assembly compared to a single solid base. Reinforced welded steel chassis distributes load evenly and withstands years of commercial outdoor use. Steel frame is fully welded into a rigid platform that resists flex under cantilever leverage. Engineered socket and fixing structure for secure connection to large side-pole umbrella masts. Adjustable feet keep the base stable on uneven terrace or pool deck surfaces. Powder-coated steel frame available in black or white to match surrounding furniture and architecture. The 145×120×20 cm footprint spreads the load over a wide area, while the low-profile design keeps sightlines clean around lounge seating, dining sets, and pool decks. Ten natural marble slabs provide the mass and visual weight that luxury hospitality projects expect. The stone finish complements contemporary terraces, resort pools, and villa gardens. Foris Hortus supports OEM/ODM finishes, branding, and packaging for hospitality projects. Contact us for CAD support, samples, and project pricing. The questions buyers ask most often about this cantilever base. Tap a question to read the answer. This base is specified as Product Type Heavy-Duty Marble Umbrella Base; Suitable For Commercial Large Cantilever Umbrella; Total Weight ~360 kg; Base Dimensions 145 × 120 × 20 cm; Marble Slab Size 46 × 46 × 5 cm; Marble Quantity 10 Pieces. All dimensions and finishes can be adjusted for the project, and the full size range is available on request. It is engineered for cantilever and side-pole umbrellas, where the whole canopy sits to one side and behaves like a sail in wind. Always match the base weight to the canopy size listed in the umbrella data. Cantilever umbrellas need noticeably more ballast than center-pole models, commonly between 160 kg and 360 kg depending on canopy size and whether the site is exposed. The size table in each umbrella listing shows the minimum recommended base weight. Water-filled HDPE tanks install fast and can be drained for storage; sand adds about 50 percent more weight in the same volume and does not freeze solid; welded steel, granite or concrete-filled bases give the highest stability with no moving parts. On hard surfaces place the base on a protective pad and check that it sits fully supported; this 360KG base is a single welded marble unit, so set it on a protective pad on hard ground and confirm it sits fully supported. For lawn or soft ground, place it on a concrete pad or use in-ground sleeves rated for the load. The 360KG base is a welded steel frame holding ten marble slabs as one rigid unit. It is a heavy single piece, so move it with handling equipment or several people rather than a two-person carry; on-site work is limited to positioning and securing the frame — no welding or bolting required. Rinse off salt and dirt near the coast and inspect the welded joints and protective pads at the start of each season. The marble and powder-coated steel need no special upkeep. Looking for the umbrella itself? Browse the cantilever umbrella range or match the base to an existing pole. A filled base anchors the umbrella against wind and keeps the pole vertical on patios, decks and pool surrounds. Powder-coated or galvanised steel and resin shells resist corrosion in salt air and poolside humidity. Fill caps and drain points let a base be topped up or emptied between seasons without tools. Weight, footprint and fixing method are confirmed against the canopy size and the local surface. Request a base sample and the full size and weight schedule for this model, or browse our complete product catalogs. Send your quantity and destination port for a quotation within one working day. Every Foris Hortus product sits in one of four configuration tiers. The tier is set by frame section, fabric specification and hardware, and it stays the same whether the order is one piece or a full scheme. Volume orders and straightforward commercial layouts. Standard aluminium frame, standard canopy fabric, fixed position. The usual specification for hotel and restaurant terraces. Upgraded frame section and fabric weight, added adjustment or opening system. Flagship hospitality projects where the terrace is photographed. Marine-grade hardware, higher-specification fabric, LED or rotation as standard. Multi-scheme developments specified to a full site brief. Bespoke dimensions, matched base and furniture, project documentation and QC. Prices are not published. Send your quantity, size and destination port and we will reply with a quotation within one business day.360KG Heavy-Duty Welded Marble Base for Large Cantilever Umbrellas

Engineered for Stability and Style
360KG Total Weight
Modular Marble Layout
Welded Steel Frame
Welded Steel Frame Built for Heavy Loads

Integrated Welded Chassis
Central Pole Socket
Leveling Feet
Black or White Finish

A Stable Foundation for Premium Outdoor Shade
Premium Marble Slab Construction

Technical Specifications
Attribute Specification Product Type Heavy-Duty Marble Umbrella Base Suitable For Commercial Large Cantilever Umbrella Total Weight ~360 kg Base Dimensions 145 × 120 × 20 cm Marble Slab Size 46 × 46 × 5 cm Marble Quantity 10 Pieces Marble Weight Per Piece ~28 kg Total Marble Weight ~280 kg Frame Welded Steel Frame Materials Marble Slab + Welded Steel Color Options Black / White Installation Modular marble assembly + central pole fixing Recommended For Hotels, Resorts, Poolside Lounges, Beach Clubs, Restaurants, Luxury Villas Designed for Premium Commercial Outdoor Spaces
Need a Custom Base Configuration?
Frequently Asked Questions
What are the main specifications?
Which cantilever umbrellas is this base made for?
How much weight does a cantilever base need?
Water fill, sand fill or solid weight?
Does it work on a deck, patio or soft ground?
How is it assembled and moved?
How do I maintain it?
At a glance
Features
Weighted stability
Marine-grade finish
Drainage and service access
Matched to the frame
Options & customisation
Need Samples or Detailed Specifications?
Four Specification Tiers, One Build Standard







