FHST063 160KG Heavy-Duty Split Steel Cantilever Umbrella Base
- Model
- FHST063
Item specifics
- Model
- FHST063
- Type
- Modular Cantilever Umbrella Base
- Max Load
- 160 KG (A3)
- Plate Size
- 45 × 45 cm per plate
- Main Material
- Steel Plate
- Connector Material
- HD Polypropylene
- Surface Finish
- Electroplated + Powder-Coated
- Configurations
- A1 55KG / A2 80KG / A3 160KG
- Steel Thickness A1
- 18 mm
- Steel Thickness A2
- 12 mm
- Steel Thickness A3
- 24 mm
- Plates A1 / A2
- 4-piece
- Plates A3
- 8-piece
- Color
- Grey / Wood-Grain Brown
- Compatible Umbrella
- Side-pole cantilever umbrellas (e.g. FHUM099 series)
Review
Description
Built for Stability. Designed for Flexibility. The A3 spec combines 8 steel plates to 160KG, giving large cantilever umbrellas the ballast they need against coastal winds. Each 45×45cm plate weighs a manageable 18-24kg, so two installers can carry the kit through hotel corridors and rooftops. Pick 55KG, 80KG or 160KG to match your umbrella size, project budget and wind exposure. Electroplating plus powder-coating seals the steel against poolside chlorine, salt air and humidity. Engineered specifically as the ballast partner for side-pole cantilever umbrellas — pairs with the FHUM099 series. Specified for hotels, resorts, beach clubs and restaurant terraces across coastal and tropical climates. Traditional 160KG cantilever bases are a single block — almost impossible to deliver to upper floors or remote terraces. The FHST063 breaks the ballast into 4 or 8 modular plates so each component is a one-person lift. The FHST063 base is built around three materials chosen for long service life under sun, salt and pool water: Keep large cantilever umbrellas stable through afternoon wind and poolside traffic. The dual-coated steel and HDPE connectors resist salt air and humid coastal air. Modular plates fit through narrow kitchen doors and restaurant back-entries. Choose 80KG or 160KG depending on umbrella size and exposure to prevailing wind. Need help matching the base to your cantilever? Talk to our engineering team for a recommended configuration. Use A1 (55KG) for 2–3M residential umbrellas, A2 (80KG) for 3M light commercial umbrellas in sheltered locations, and A3 (160KG) for 3–4M commercial or coastal umbrellas where wind exposure is high. The FHST063 is the steel base only. It is designed to pair with the FHUM099 series cantilever umbrella, but it is also compatible with most side-pole cantilever umbrellas on the market that share the standard 45×45cm footprint. The base ships as individual plates (18–24kg each). Two installers can carry all plates to most rooftops, terraces and pool decks. Assembly is mechanical — plates bolt together via the HDPE connectors — no welding required on site. The electroplated + powder-coated finish is maintenance-free for normal outdoor use. Rinse with fresh water periodically if installed by the sea to remove salt deposits, and check the leveling feet every 6 months.
FHST063 160KG Heavy-Duty Split Steel Cantilever Umbrella Base
Why Choose the FHST063 Cantilever Base
Six engineering advantages for commercial-grade cantilever installations
160KG Max Load
Split Modular Design
3 Weight Options
Dual-Coated Steel
Built for Cantilevers
Commercial-Ready
Split Modular Construction
Heavy-duty ballast that still fits through a service door
Three Configurations, One Base System
Match ballast to umbrella size, exposure and budget
Spec A1 · 55KG A2 · 80KG A3 · 160KG Total Weight 55 KG 80 KG 160 KG Number of Plates 4-piece 4-piece 8-piece Plate Size 45 × 45 cm 45 × 45 cm 45 × 45 cm Steel Thickness 18 mm 12 mm 24 mm Best Paired With 2-3M residential 3M light commercial 3-4M commercial / coastal Typical Use Villa terrace Café patio Hotel poolside, rooftop Engineered for Outdoor Longevity
Steel + dual coating + HDPE connectors
Where the FHST063 Base Shines
Trusted across commercial outdoor environments
Hotel Pool Decks
Beach Resorts
Restaurant Terraces
Café & Beach Clubs
Frequently Asked Questions
Common questions from hotel, resort and project buyers
Which FHST063 configuration should I choose for my cantilever umbrella?
Is the FHST063 sold with or without the cantilever umbrella?
How is the base shipped and installed?
What maintenance does the steel base require?
