Closed at 220 cm
With the extension closed, the table seats a run of six to eight on a terrace, with the slats continuous across the top.
An extendable outdoor dining table with an aluminium slat top. Closed, the table is 220 cm long; extended, it reaches 280 cm. The top is 122 cm wide and 74 cm high, carried on X-shaped crossed legs with a longitudinal beam underneath. It is made for commercial outdoor use: hotel terraces, villa courtyards, poolside decks and restaurant gardens. Every table is packed one to a carton of 228.5 x 131.5 x 14 cm, and 160 tables load into a 40'HQ container against a minimum order of one container. With the extension closed, the table seats a run of six to eight on a terrace, with the slats continuous across the top. The middle section slides out to add 60 cm of dining length, with the joint visible at the two seams. The top is built from aluminium slats running the length of the table, so water runs off and the top stays light to handle. Crossed legs at each end carry the top, held by a longitudinal beam underneath. Four things this table is specified for on commercial projects. A slatted aluminium top, built for a terrace rather than a covered room. 220 cm for everyday service, 280 cm when the terrace is laid out for a larger group. Custom size, colour and logo for hotel, restaurant and villa projects. One table per carton of 0.421 CBM, 160 tables per 40'HQ, quoted and loaded as one shipment. Aluminium slats run the length of the top, with even seams between them. The middle section slides out along the beam under the top, adding 60 cm to the dining length. Crossed legs at both ends, tied by a longitudinal beam that carries the closed and extended top. Each table is packed one to a carton measuring 228.5 x 131.5 x 14 cm, a carton volume of about 0.421 CBM calculated from that size, with a gross weight of 45.5 kg and a net weight of 39.5 kg. 160 tables load into one 40'HQ container and the minimum order is one container, so freight and the landed cost per table can be planned from the container before the order is placed. Quotation is per table, on request. Send the terrace plan, the number of covers and the finish you are working to, and the reply confirms the layout and a delivered quotation within one working day. Long runs for breakfast and evening service, shortened again when the terrace is cleared. One table that covers everyday dining and the larger group at the same address. A slatted aluminium top that is washed down with the deck between seasons. Identical tables along a garden run, extended for groups without changing the layout. The quotation is for the table. Outdoor chairs are specified separately and are not part of this item. Each table ships in a single carton of 228.5 x 131.5 x 14 cm with a gross weight of 45.5 kg. Send the terrace plan and the number of covers, and the layout is confirmed before the order is placed. Wipe the aluminium slats with fresh water and a soft cloth, along the direction of the slats. Keep the sliding section clear of grit when the table is opened and closed, so the two top sections meet evenly. Rinse the crossed legs and the beam with fresh water after the deck is washed down, and wipe dry. Close the extension and cover or store the table when the terrace is out of use for the season. The specification sheet for the table is supplied with the quotation. Carton size and the 40'HQ loading plan, so freight is quoted against a table count. Send a terrace plan or photographs of the space and the table layout is confirmed before the order is placed. 220 cm closed and 280 cm extended, 122 cm wide and 74 cm high. No. This item is the table only; outdoor chairs are specified separately. 160 tables per 40'HQ, one table per carton of 228.5 x 131.5 x 14 cm. One 40'HQ container, which loads 160 tables. Aluminium slats running the length of the top, with an extendable middle section and crossed legs on a longitudinal beam underneath. Your project, the terrace plan, the number of covers and the quantity. We reply with the specification and a quotation per table. Send us the terrace plan, the number of covers and the finish you are working to, and we will come back with the layout and a delivered quotation. Lead time is 25 to 40 days after order confirmation, payment is 30% deposit by T/T with 70% before shipment, and quotations are valid for 30 days. Every Foris Hortus product sits in one of four configuration tiers. The tier is set by frame section, fabric specification and hardware, and it stays the same whether the order is one piece or a full scheme. Volume orders and straightforward commercial layouts. Standard aluminium frame, standard canopy fabric, fixed position. The usual specification for hotel and restaurant terraces. Upgraded frame section and fabric weight, added adjustment or opening system. Flagship hospitality projects where the terrace is photographed. Marine-grade hardware, higher-specification fabric, LED or rotation as standard. Multi-scheme developments specified to a full site brief. Bespoke dimensions, matched base and furniture, project documentation and QC. Prices are not published. Send your quantity, size and destination port and we will reply with a quotation within one business day.Aluminium slat extendable outdoor dining table, 220 cm to 280 cm

Specification at a glance
Table top Aluminium slats, running the length of the table, with an extendable middle section Base X-shaped crossed legs with a longitudinal beam under the top Closed length 220 cm Extended length 280 cm Width and height 122 cm wide, 74 cm high Carton 228.5 x 131.5 x 14 cm, one table per carton Gross / net weight 45.5 kg / 39.5 kg Loading 160 tables per 40'HQ MOQ 1 x 40'HQ container (160 tables) How the table works

Closed at 220 cm
Extended to 280 cm
Slat top
X-frame legs
Why Foris Hortus
Aluminium slat top
One table, two sizes
OEM and ODM
Container loading
Table top, extendable section and legs
Slat top and seams
Extendable section
X-frame and beam
Dimensions
Closed length 220 cm Extended length 280 cm Width 122 cm Height 74 cm 
Packing and container loading
Table specification and loading
Code Item Carton 40'HQ Quotation FHTB068-A1 Aluminium slat extendable dining table, 220 / 280 cm 228.5 x 131.5 x 14 cm, one per carton 160 tables On request Where this table is specified

Hotel rooftops

Villa courtyards
Poolside decks
Restaurant gardens
What the table is supplied with
Table only
One carton per table
Layout confirmation
Care and maintenance
Cleaning the slat top
The extendable section
Legs and beam
Off season
Ordering and customisation
MOQ 1 x 40'HQ container (160 tables) Lead time 25 to 40 days after order confirmation Payment terms 30% deposit by T/T, 70% before shipment Carton 228.5 x 131.5 x 14 cm, one table per carton Customisation OEM and ODM: custom size, colour and logo HS code 9403899000 (outdoor table) Documentation Specification sheet, carton size and container loading plan Drawings and documentation
Specification sheet
Carton and loading plan
Layout confirmation
Common questions
How long is the table closed and extended?
Does the table come with chairs?
How many tables fit a container?
What is the minimum order?
What is the table top made of?
What should I send for a quotation?
Planning an outdoor dining terrace?
Four Specification Tiers, One Build Standard
The middle section slides out to add 60 cm, with the joint visible at the two seams, taking the table from six to eight seats to a larger group.
Aluminium slats run the length of the top, so water runs off and the surface stays light to handle at 122 cm wide and 74 cm high.
Crossed legs at each end carry the top and are held by a longitudinal beam underneath, keeping the extended 280 cm top steady in service.
Each table ships in a 228.5 x 131.5 x 14 cm carton of 0.421 CBM at 45.5 kg gross, and 160 tables load into a 40'HQ.
Request a material sample and the full size and fabric schedule for this model, or browse our complete product catalogs. Send your quantity and destination port for a quotation within one working day.