A four-piece outdoor lounge set built on a boxy aluminium frame in matt dark charcoal, whose arm panels and armchair back panels are filled by a ladder of thin horizontal wood-look slats with dark gaps between them, over thick black cushions, with a low table whose top is half wood grain and half charcoal. The set is a three-seat sofa, two armchairs and one coffee table.
The slats are what give this family its character: they fill the open panels of the frame as a ladder rather than sitting on top of the arms, so daylight passes between them and the striped shadow they throw onto the paving is what you notice first. Because the slats, the frame and the cushions are specified in the same workshop, a project can adjust the slat tone and the cushion colour against the surface the set will stand on.
We build outdoor furniture rather than trade it, which is what lets a set be specified around the space instead of around what happens to be in stock.
Built in our own factoryFrames are welded and finished in our Zhejiang workshop, then packed for export.
Slats fitted in houseThe wood-look panels are cut and fitted in the same workshop as the frame, so alignment and tone are controlled.
Made to your schemeFrame colour, slat tone, cushion colour, size and logo branding to a project brief.
Export readyCartons, HS code and declaration details already documented for customs.
One frame specification, three settings
The same four pieces are specified for a terrace above the sea, a hotel pool deck and a covered garden pavilion.
In a villa courtyard, grouped around the low table beside water.Under a covered pavilion, where the slats pick up the timber of the ceiling.
On a hotel terrace, where the dark frame holds its own against the facade.Two armchairs and the table, which is the version that suits a suite balcony.
The slat ladder and the frame
The slats are the detail that decides how this set reads on a terrace, so it is worth being precise about where they sit.
Thin wood-look slats spanning the arm panel, with gaps between them.The frame corner: the slat ladder runs inside the charcoal rails, with a square leg below.
A ladder inside the frame
The slats span the open panels between the charcoal rails rather than lying on top of the arms, which is what keeps a dark frame from reading as one solid block.
Light through the gaps
There is a gap between each slat, so daylight passes through the panel and the set throws a striped shadow onto the paving.
A matt finish
An even matt charcoal surface with no gloss, so the frame does not glare back at you in midday sun.
Aluminium throughout
The structure is aluminium, which is what makes a set this size manageable to move on a terrace.
Cushions and the coffee table
On an outdoor lounge set the cushions are the part that wears first and the part guests judge the set by.
A thick dark charcoal-grey cushion with a piped edge and a cover that comes off for cleaning.The low table: half light wood grain, half dark charcoal.
Seat and back cushions
Thick dark charcoal-grey cushions cut to each piece, so the sofa and both armchairs share one specification.
Removable covers
Covers come off for cleaning separately from the core, which is what keeps a terrace presentable through a season.
Outdoor fabric
A polyester fabric chosen for outdoor use, with the core kept separate so it never has to get wet.
A two-tone table top
One half of the table top is light wood grain and the other half is dark charcoal, which ties the table to the frame rather than matching the cushions.
Set pricing and loading
Two SKUs are quoted for this set. Both ship in the same carton at the same loading, and each is quoted per set, FOB.
Prices are per set, FOB Ningbo. Mixed containers and project quantities are quoted on request, and we will confirm which of the two specifications suits your project when you enquire.
Packing, loading and documentation
Production data for the set, at one set per carton.
Aluminium with a matt dark charcoal finish and light wood-look slat panels
Cushion fabric
Polyester outdoor fabric, removable covers
Place of origin
China, Zhejiang
HS code
9401719000
Declaration
Outdoor · polyester fabric · aluminium frame · with cushions · no brand
Inspection
Not required for this commodity
Where this set is specified
Four settings where a slatted aluminium lounge set earns its place, on one frame and cushion specification.
Terraces above the sea
A dark frame against pale stone and open water, which is what the slat detail is there to break up.
Hotel pool decks
Aluminium and removable covers stand up to a deck that is rained on and cleaned daily.
Restaurant terraces
The slats tie the set to a timber deck or a pergola rather than sitting on it as an afterthought.
Suite balconies
Two armchairs and the low table fit a balcony where a full sofa set will not.
Care and maintenance
Four routines that keep a slatted aluminium set presentable through a full outdoor season.
Frame and slats
Rinse with mild soap and water. Avoid abrasive pads on the slats and on the matt finish.
Cushion covers
Remove the covers and clean them separately, so the cushion core never has to get wet.
The table top
Wipe the slatted top with a damp cloth. It is a surface for a tray or a book, not for standing on.
Off-season
Store cushions dry and indoors, or under cover, and leave the frame where air can move around it.
Ordering and customisation
From a single branded armchair to a full resort rollout, the set is configured to your specification rather than to a catalogue page.
ConfigurationFull four-piece sets, or individual armchairs and the coffee table.
Colour and brandingFrame colour, slat tone, cushion colour and logo branding to a project brief.
Size adjustmentsSofa, chair and table sizes adjusted to the space and to a container plan.
OEM and ODMSamples before bulk production, with packing and documentation handled for export.
Send us the space, how many people need to sit at once and the scheme you are working to, and we will come back with the configuration, the packing plan and a delivered price.
Common questions
The questions buyers ask most often about this slatted aluminium lounge set.
What is included in the set?
One three-seat sofa, two single armchairs and one low coffee table, in one frame and one cushion specification.
What are the slats made of?
The frame is matt dark charcoal aluminium and the slats are a light wood-look finish, fitted as a ladder across the open arm and chair-back panels. The armrest tops are plain dark charcoal aluminium.
Are the cushion covers removable?
Yes. The covers come off for cleaning separately from the cushion core, so the core never has to get wet.
How many sets fit a container?
66 sets per 40HQ, at one set per carton of L189 x D71 x H75 cm and 1.006 CBM per set. We will plan the loading against your order.
Can the pieces be ordered separately?
Yes. The set is a convenient grouping rather than a fixed SKU, so single armchairs and extra tables can be ordered on their own.
What should I send for a quotation?
The space, how many people need to sit at once, the colour scheme, and whether you are working to a container plan.
Planning a terrace or poolside lounge?
Tell us the space, the number of seats and the scheme you are working to, and we will come back with the configuration, the packing plan and a delivered price. Start an enquiry.
