Center Pole Patio Umbrella - 48mm Pole, 8 Ribs, 2.5-4m Canopy
- Price
- US $127-130
- Model
- Center Umbrella Series
- MOQ
- 100 piece
Item specifics
- Pole material
- Aluminum 48x1.8mm, oxidized brushed matte silver
- Rib material
- Aluminum 20x30x1.2mm, 8 ribs
- Fabric
- 280g yarn-dyed fabric, UV-resistant
- Canopy shape
- Square & Round
- Available sizes
- Square 2.5/3/3.5/4m; Round 2.5/2.7/3/3.5/4m
- Application
- Hotel pool decks, restaurant terraces, villa patios, resorts
- Service
- OEM/ODM, custom color & branding
- Specification Level
- Level B · Standard — Standard specification with upgraded frame and fabric.
Review
Description
A clean market-style parasol built around a 48mm anodized aluminum pole and eight reinforced ribs. The pulley-cord lift opens the canopy smoothly by hand, and the round shade quietly upgrades any garden, terrace or poolside from bare to inviting. Six details that make this center-pole umbrella a dependable hospitality and residential shade. A thick natural-anodized aluminum main pole resists rust and bending, giving the canopy a steady, commercial-grade centre of gravity. Eight aluminum ribs hold the canopy taut from hub to edge, so the fabric stays smooth and wind-resistant in daily use. A simple rope-and-pulley system opens and closes the canopy by hand, then a locking pin holds it safely in place. High-density polyester with PA coating delivers UPF50+ UV protection and light rain resistance with double-stitched seams. A tilt joint lets staff angle the canopy toward the low sun, extending comfortable shade through the afternoon. Pairs with a cross base, ground sleeve or marble base so the umbrella suits decks, lawns and pool copings alike. The pulley-cord lift means one person opens the canopy without strain - just pull the cord and secure the locking pin. Staff and homeowners can set the shade up in seconds, then adjust the optional tilt to follow the afternoon sun. A generous round canopy drops a calm pool of shade over dining sets, lounge chairs and conversation pits. Resorts, cafes and villa owners keep their terraces bookable through hot midday hours and warm evenings alike. The same parasol earns its place wherever guests gather outdoors - private gardens, rooftop terraces and five-star pool decks. Confirmed measurements and build details for project planning and procurement. Foris Hortus supplies umbrellas, bases and outdoor furniture to hotels, resorts and F&B groups as one coordinated order. We supply hotels, resorts and F&B groups with consistent commercial-grade outdoor shading. Anodized aluminum pole and eight reinforced ribs engineered for daily hospitality use. Custom canopy colours, fabric printing and pole finishes let the umbrella match your property identity. Container-ready packaging and documented QC for cross-border hotel and resort projects. The main pole is 48mm natural-anodized aluminum for rust-proof, lightweight commercial use. A wood-grain finish is available on request. It uses a pulley-cord lift: pull the rope to raise the canopy, then secure it with the locking pin. Some versions add a push-button tilt. We recommend a 30KG cross base for smaller sizes and a 40-50KG marble base for 4M units. Bases are sold separately. Yes. We offer custom canopy colours, fabric printing and pole finishes to match your hotel or resort brand identity. With the proper base the umbrella is rated up to Beaufort 5-6 (about 40 km/h). We recommend closing it in stronger gusts. Tell us your quantity, umbrella size and destination port. We will reply with a tailored quotation within one business day. Four benchmark canopy fabrics are available as standard, each selected for outdoor colour stability, weather resistance and commercial service life. Two additional options are available for projects on a different budget. Pick the performance level the project needs - the difference in raw material composition, colouring craftsmanship and weather resistance is what separates a 3-year canopy from a 10-year one. Premium acrylic imported from the USA - the industry benchmark for hospitality projects. Leading domestic premium outdoor fabric - a cost-effective alternative to imported acrylic. Our in-house developed blend engineered for durability, texture and weather resistance. Full colour cards, physical swatch availability and custom colour matching are available on request - see fabric and colour customization. The aluminium frame is offered in three finishes so the umbrella matches the architecture and the brand of the project. All three are applied to marine-grade aluminium and pass a 72-hour salt spray test. Premium powder-coat treatment with a rich colour range. Excellent resistance against fading and chipping, and the most practical choice for coastal and high-traffic sites. Realistic timber texture transferred onto aluminium - the warm appearance of wood with no wood maintenance, no rot and no repainting. Durable anodized surface that is scratch-resistant and anti-corrosion, retaining its metallic texture for long-term outdoor use. Frame dimensions, rib counts and mounting hardware can be adjusted for the project - see frame and structure customization, and logo and branding options. The questions buyers ask most often about this model. Tap a question to read the answer. This model is specified as Brand Foris Hortus; Fabric 280g yarn-dyed fabric, UV-resistant. All dimensions and finishes can be adjusted for the project, and the full size range is available on request. Round, square and rectangular canopies from 2.5 m up to 4 m and beyond are produced, with 8 ribs as the standard configuration. Vented double-tier and three-tier versions are available where wind resistance and heat dissipation matter. Depending on the model: hand-crank lift, push-pull telescopic pole, pulley rope or gas spring assistance. Larger commercial canopies typically use gas spring assistance so the canopy can be raised and lowered by one person. Most commercial umbrellas take a resin, concrete or water-filled base, and larger sizes need a heavier base or in-ground anchoring. Match the base to the canopy size and to whether the surface is a patio, deck or lawn. A vented double-tier canopy reduces wind load noticeably compared with a single tier, and a three-tier pagoda construction adds further stability. As with any parasol, the correct behaviour in strong wind is to close it - no umbrella is designed to stand in a storm. Yes. This model is specified with 280g yarn-dyed fabric, UV-resistant; Sunbrella solution-dyed acrylic is the premium choice for flagship projects, with Evercolor, our proprietary blend and Olefin as cost-effective alternatives. All options are listed in the fabric section below. Yes. Logos can be applied to the canopy corners, valance, top plate or handle housing, and frame colours are customizable across the powder-coated range. Mail-order packaging designed to pass an 80 cm drop test, with bases shipped separately to keep the parcel manageable. Outdoor furniture carries a 12-month warranty from the date of loading. Solution-dyed polyester with PA coating blocks over 99% of UV rays and holds its colour in high-exposure coastal terraces. Powder-coated aluminium masts and ribs resist corrosion in salt air and poolside humidity, with no seasonal retreatment. Reinforced rib joints, self-lubricating connectors and adjustable tilt keep the canopy stable and safe in strong winds. Custom mast diameters, fabric colours, solar LED lighting, fringe and printed logos for branded terrace projects. Request free fabric samples and the full specification sheet for this model, or browse our complete product catalogs. Send your quantity and destination port for a quotation within one working day. Every Foris Hortus product sits in one of four configuration tiers. The tier is set by frame section, fabric specification and hardware, and it stays the same whether the order is one piece or a full scheme. Volume orders and straightforward commercial layouts. Standard aluminium frame, standard canopy fabric, fixed position. The usual specification for hotel and restaurant terraces. Upgraded frame section and fabric weight, added adjustment or opening system. Flagship hospitality projects where the terrace is photographed. Marine-grade hardware, higher-specification fabric, LED or rotation as standard. Multi-scheme developments specified to a full site brief. Bespoke dimensions, matched base and furniture, project documentation and QC. Prices are not published. Send your quantity, size and destination port and we will reply with a quotation within one business day.
Center Pole Patio Umbrella with 48mm Aluminum Pole
Built for Everyday Outdoor Use
48mm Aluminum Pole
8 Reinforced Ribs
Pulley-Cord Lift
220g PA-Coated Canopy
Optional Push-Button Tilt
Flexible Base Options

Open It With a Simple Pull

Comfort That Keeps Guests Outdoors
From Villa Courtyards to Resort Pools


Technical Specifications
Product Type Center-pole (market) parasol Available Sizes Round: 2.5M / 3M / 3.5M / 4M diameter Main Pole 48mm natural-anodized aluminum Ribs 8 reinforced aluminum ribs Canopy 220g polyester + PA coating, double-stitched Operation Pulley-cord lift with locking pin Tilt Optional push-button tilt Pole Finish Anodized silver (wood-grain optional) Wind Rating Up to Beaufort 5-6 (approx. 40 km/h) with proper base Recommended Base Cross base 30KG / marble base 40-50KG (sold separately) Customization Canopy colour, fabric printing, pole finish Applications Garden · patio · poolside · cafe terrace · resort A Reliable Partner for Outdoor Hospitality
B2B Manufacturer
Commercial Construction
Brand Customization
Worldwide Project Supply
Common Questions About This Center Pole Umbrella
Is the pole made of wood or aluminum?
How does the canopy open?
What base do I need?
Can the canopy be branded with our logo?
What wind speed can it handle?
Get a Quote for This Center Pole Umbrella
Canopy Fabric Customization
Fabric Material Colour Fastness Outdoor Lifespan Sunbrella 100% Solution-dyed Acrylic Grade 7-8 10 years+ Sauleda Acrylic Grade 4-5 3-5 years Feiler Acrylic Grade 6 5-8 years Olefin Polypropylene Grade 4-5 3-5 years 
Sunbrella

Evercolor

Proprietary Blend
Frame Finish Customization

Powder-Coated Finish

Heat-Transfer Wood-Grain

Anodized / Oxidation
Frequently Asked Questions
What are the main specifications?
Which sizes and shapes are available?
How does it open and close?
Which base fits?
How does it perform in wind?
Can I choose the canopy fabric?
Can my logo be added?
How is it packed and what is the warranty?
At a glance
Features
UV80+ canopy fabric
Marine-grade aluminium frame
Wind-tested reinforced ribs
OEM sizes, colours and branding
Options & customisation
Need Samples or Detailed Specifications?
Four Specification Tiers, One Build Standard










